Get 5% off with code(500offnow) Subscribe & Save
Arrives soon! Get it by Apr 29-04 if you order today.
Returns & exchanges accepted.
Grade 1, first-quality porcelain tile pebbles for floor and wall tiles, glazed smooth finish. P.E.I. Rating IV has high resistance to abrasion and is suitable for heavy-duty residential and commercial kitchens, hotels, exhibition and sales rooms with some dirt conditions, Impervious flooring has a water absorption of less than 0.5% for indoor and outdoor use and is frost resistant. Completely frost resistant for indoor or outdoor applications.
Item# | FS1703 |
Color | Cream |
Finish | Glossy |
Material | Porcelain |
Recommended Uses | Wall & Backsplash, Floor Tile, Pool Tile, Shower Floor, Fireplace |
Sheet Coverage | 0.9 sq ft |
Sheet Size | 290x290 mm |
Thickness | 4 mm |
This is our new design marble glass tile, we name this tile Stone Age. It is interlocking design with blue crystal glass and grey marble stone.We polish the surface of the marble to make it glossy, th..
The tile has a name of rainbow, because it has iridescent finish, you will see different colors from different angles, it may looks like blue, green, purple, pink or yellow etc. It is interlocking des..
This tile was designed based on glass chips which have both finish: silver coated glass and clear crystal glass. When coating the glass chips, it makes the finish looks like metal, but it is stronger..
Porcelain pebbles are glazed porcelain tile which designed as pebble shapes. The chips look like triangles with rounded edges, also look like heart shape. These tiles are made of porcelain which almos..
5 star | 0% | |
4 star | 0% | |
3 star | 0% | |
2 star | 0% | |
1 star | 0% |
Share your thoughts with other customers
Write a customer reviewThis metallic-finished ceramic tile is very attractive and easy to install. Mainly, though, I wanted to address the grouting procedure, which others have mentioned as difficult, especially cleaning it from the recessed tiles. I used a gray-colored non-sanded grout, mixed it to a wet slurry and applied it across the surface with a sponge and my fingers, making sure it was pressed into all the joints. After letting it set a few minutes, I used a tile-grout sponge to repeatedly clean the surface. Surprisingly, any grout left in the recesses actually enhances the appearance of the finished surface. All-in-all, a great success and a great look.